H0927 Insta-Cure+, 2 oz.

This gap-filling cyanoacrylate is tough to beat.

Insta-Cure+ is a higher viscosity CA (super glue) for loose fitting joints in which the adhesive must bridge gaps.

The H0927 Insta-Cure+ is a powerful CA or Cyanoacrylate in a two ounce bottle.

Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds.

For large surface areas, including those with close fitting joints such as laminations, Insta-Cure+ should also be used.

To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.

WORKS BEST ON:

• Balsa wood
• Soft wood

WORKS WELL ON:

• Hard wood
• Glass
• Metal
• Fiberglass
• Ceramics
• Hard Plastics
• Rubber

FEATURES:

• Full strength is reached in three hours
• Refrigerate to extend shelf life
H0927 Insta-Cure+, 2 oz.